DIY Electronics
5F2A Tube amp build. I spent a lot of time planning this. It sounds Great. I did a few modifications to modernize it. Thanks to HoffmanAmps.com and RobRobinette.com
These are two midi controllers i made. Huge undertaking. I used the teensy 4.1 micro controller and used every bit of the I/O. I also programmed them using the amazing Control Surface library. i think the creators name on github is ttapa. On the second one, i used figured walnut, purple heart, and a cool veneer over birch for the face. I still haven’t figured out the fader knobs =(
Also at the end is a monitor controller i created, it has two inputs and two outputs, monitor selector switch, a mute, a mono switch. and a left right swap switch. I terminated everything with a snake cable connected to a DB25 plug.
This is an assortment of random rack enclosures ive made for my diy audio gear and guitar pedals.
These are two speaker cabinets Ive made. The first one is an oversized closed back 2×12 cab. Its made of pine, a Baltic birch baffle, and an ebonized oak and purple heart grill frame. I installed two Celestion Greenbacks into it, it sounds sick as fuck.
The Second is a 1×12 made with the exact same types of wood. I made a second back so it could be open or closed and i installed a creamback into it, it also sounds sick as fuck.
These are two speaker cabinets Ive made. The first one is an oversized closed back 2×12 cab. Its made of pine, a Baltic birch baffle, and an ebonized oak and purple heart grill frame. I installed two Celestion Greenbacks into it, it sounds sick as fuck.
The Second is a 1×12 made with the exact same types of wood. I made a second back so it could be open or closed and i installed a creamback into it, it also sounds sick as fuck.